Foil Double Bubble Foil Insulation 750 s.f.
|1 – 9||$345.00|
|10 – 19||$330.00|
EcoFoil Double Bubble Foil Insulation is very thin (1/4" to 5/16"), with a foil surface on one each side. This insulation is rated and tested by reflectivity and emissivity. It is 96% reflective and 4% emmissive, which means the product only allows 4% of radiant heat to pass through it. To put it simple, the insulation does not try to slow the way heat passes through it, the insulation tries to eliminate heat from passing through it. EcoFoil Double Bubble Foil Insulation is constructed of a double layer of polyethylene bubble insulation, bonded to two radiant barrier metalized sheets. The insulation not only works well to reflect radiant heat, but it also works as a vapor barrier, preventing condensation which can cause mold. EcoFoil Double Bubble Foil Insulation is primarily used for pole barns, commercial buildings, basement walls, crawl spaces and storage units. Our insulation can be used for both new construction and existing buildings. It is a great product for many spaces as the insulation acts as a vapor barrier which keeps unwanted moisture from your building, which reduces the possibility of mold issues. Important You must tape any seams on the insulation. By doing this, the product acts as one sheet and maintains the moisture barrier. EcoFoil Double Bubble Foil Insulation is not to be used for under slab applications as the radiant barrier product is exposed. We offer a specific under slab insulation where the radiant barrier is encapsulated between two layers of bubbles. EcoFoil Double Bubble Foil Insulation performs the same regardless of what size roll is used. The common reason for choosing our 750 sq. ft. roll is if it provides savings in installation cost or time to install. Because this roll is considered "over-sized", it makes it more expensive than our standard 4' roll. As a result, it is often more economical to go with the 500 sq. ft. roll in the same amount of square footage needed for an application. If you need assistance comparing the costs, or for a custom quote, please give us a call at (888) 349-3645 and we would be glad to help walk through this to ensure you get the product that is right for you!
- Bleeding / Delamination:None (ASTM C1224-03)
- Corrosiveness:Pass (ASTM D3310-00)
- Emissivity:0.04 (ASTM C1371-04A)
- Pliability:No Cracking (ASTM C1224-03)
- Reflectivity:0.96 (ASTM E903)
- Resistance to Fungi:Does Not Promote Growth (ASTM C1149)
- Water Vapor Permability:0.02 Perms (ASTM E96)