Ecofoil will be closed on 12/24, 12/25, 12/31 and 1/1/21 for the holidays to allow our employees to spend time with their families. Shipments will resume on Mon. 12/28 and 1/4/21 respectively
(888) 349-3645
Ecofoil will be closed on 12/24, 12/25, 12/31 and 1/1/21 for the holidays to allow our employees to spend time with their families. Shipments will resume on Mon. 12/28 and 1/4/21 respectively

Single Bubble Insulation - Foil/Foil - 4' x 125' (500 sq ft)

SKU: EF2210-48-125
color
square foot
375 sq ft
500 sq ft
750 sq ft
How much product do I need?
/ 12
Walls:
0 sq. ft.
Roof:
0 sq. ft.
Total:
0 sq. ft.
$145.00

EcoFoil Single Bubble Foil Insulation is very thin (1/8" to 3/16"), with a foil surface on each side. This insulation is rated and tested by reflectivity and emissivity. It is 96% reflective and 4% emissive, which means the product only allows 4% of radiant heat to pass through it. To put it simple, the insulation does not try to slow the way heat passes through it, the insulation tries to eliminate heat from passing through it.

This insulation is constructed of a single layer of polyethylene bubble insulation, bonded to two radiant barrier metalized sheets. The insulation not only works well to reflect radiant heat, but it also works as a vapor barrier, preventing condensation which can cause mold. EcoFoil Single Bubble Foil Insulation is primarily used inpole barns, metal buildings, basement walls, crawl spaces, and storage units. Our insulation can be used for both new construction and existing buildings.

Important - You must tape any seams on the insulation. By doing this, the product acts as one sheet and maintains the moisture barrier. EcoFoil Single Bubble Foil Insulation is not to be used for under slab applications as the radiant barrier product is exposed. We offer a specific EcoFoil Under Slab Insulation where the radiant barrier is encapsulated between two layers of bubbles.

EcoFoil Single Bubble Foil Insulation is very thin (1/8" to 3/16"), with a foil surface on each side. This insulation is rated and tested by reflec...

Read More

EcoFoil Single Bubble Foil Insulation is very thin (1/8" to 3/16"), with a foil surface on each side. This insulation is rated and tested by reflectivity and emissivity. It is 96% reflective and 4% emissive, which means the product only allows 4% of radiant heat to pass through it. To put it simple, the insulation does not try to slow the way heat passes through it, the insulation tries to eliminate heat from passing through it.

This insulation is constructed of a single layer of polyethylene bubble insulation, bonded to two radiant barrier metalized sheets. The insulation not only works well to reflect radiant heat, but it also works as a vapor barrier, preventing condensation which can cause mold. EcoFoil Single Bubble Foil Insulation is primarily used inpole barns, metal buildings, basement walls, crawl spaces, and storage units. Our insulation can be used for both new construction and existing buildings.

Important - You must tape any seams on the insulation. By doing this, the product acts as one sheet and maintains the moisture barrier. EcoFoil Single Bubble Foil Insulation is not to be used for under slab applications as the radiant barrier product is exposed. We offer a specific EcoFoil Under Slab Insulation where the radiant barrier is encapsulated between two layers of bubbles.

Show Less

bleeding delamination:
None (ASTM C1224-03)

corrosiveness:
Pass (ASTM D3310-00)

emissivity:
0.04 (ASTM C1371-04A)

pliability:
No Cracking (ASTM C1224-03)

reflectivity:
0.96 (ASTM E903)

resistance to fungi:
Does Not Promote Growth (ASTM C1149)

temperature range:
-50F to 180F (ASTM C411)

water vapor permability:
0.37 Perms (ASTM E96)

Product Spec Sheet: