What Is Radiant Heat Barrier?
EcoFoil® perforated radiant barrier uses reflective technology to increase the energy efficiency and comfort level of your home. Also called reflective foil, EcoFoil can be installed in many areas of your home. Radiant barrier is made of a thin layer of woven polyethylene that is sandwiched between two sheets of highly reflective metalized/aluminum. It blocks up to 97% of radiant heat transfer which helps to keep your home cooler in the summer and warmer in the winter. Our perforated radiant barrier has tiny pin holes punched throughout the roll so that you can install it over top of mass insulation without the concern of trapping moisture.
Where Is Radiant Heat Barrier Used?
In the Attic - In your attic, perforated radiant barrier works by reflecting heat away from the attic during long, hot summer days. This keeps your attic cooler and your home more comfortable.
It is NOT RECOMMENDED to use any type of tape on the radiant barrier in your attic. The tape will block the perforations and allow condensation to form in these places!
Radiant Barrier is very light weight yet highly durable so installation is a breeze. All you will need is a sharp utility knife or scissors, tape measure and a staple gun if installing under the rafters or as house wrap. Browse the installation files below that match your application.
Download the Attic Floor Installation instructions (PDF)
Download the Under Rafter Installation instructions (PDF)
Download the House Wrap instructions (PDF)
Specifications for Perforated Radiant Heat Barrier
Download a printable spec sheet for this product: Radiant Barrier - Perforated (434 KB)
|Fire Rating|| Class 1/ Class A (ASTM E84-09)|
|Emissivity||0.04 (ASTM C1371-04A)|
|Water Vapor Transmission||1.84 Perms (ASTM E96-05)|
|Corrosiveness||Pass (ASTM D3310-00)|
|Bleeding / Delamination||None (ASTM C1313-05)|
|Pliability||No Cracking (ASTM C1313-05)|
|Resistance to Fungi||Pass (ASTM C1338-08)|
|Tensile Strength||Length: 27.34 lbs, Width: 16.31 lbs. (ASTM D2261)|
|Temp Range||-50F to 180F (ASTM C411)|