Product Details
What Is Bubble Insulation?
EcoFoil® Double Bubble (White Poly/Foil) Insulation consists
of two layers of 8 mil poly bubble insulation which is then covered on one side side by a reflective metalized/aluminum composition and on the other side by a sheet of UV Rated White polyethylene. It provides
superior protection against radiant heat transfer and also provides an
effective vapor barrier if properly sealed with white tape.
Where Is Bubble Insulation Used?
Wall Insulation - Double Bubble White/Foil insulation is commonly used as wall insulation in metal and post frame buildings as a vapor and condensation barrier.
It can be placed on the outside of the roof purlins during new construction or attached to the inside of the purlins in a retrofit application.
Download the New Wall Installation Instructions (PDF)
Download the Retrofit Installation Instructions (PDF)
Roof Insulation - Double Bubble White/Foil
insulation is also commonly used in the roof of metal and post frame
buildings as a vapor and condensation barrier. It can be placed on the outside of the roof purlins during new
construction or attached to the inside of the purlins in a retrofit
application.
Download the New Roof Installation Instructions (PDF)
Download the Retrofit Installation Instructions (PDF)
Roll Size - 48" x 75' (300 sf)
Product Specifications
Download a printable Spec Sheet for this product here: Double Bubble White/Foil Insulation
| Nominal Thickness | 5/16" |
| Fire Rating | Class 1/ Class A (ASTM E84-09) |
| Temp Range | -50F to 180F (ASTM C411) |
| Emissivity | 0.057 (ASTM C1371-04A) |
| Reflectivity | 0.943 (ASTME903) |
| Water Vapor Permeability.... | 0.02 Perms (ASTM E96) |
| Resistance to Fungi | Does Not Promote (ASTM C1149) |
| Corrosiveness | Pass (ASTM D3310-00) |
| Thermal Resistance (3.5" cavity)... | R-15.2 (Heat Flow Down), R-8.5 (Horizontal Heat Flow) |
| UV Testing | 90+% Retained Retention after 4000 hrs (ASTM G155) |